Description
The easy2 – AIS MOB is an AIS emergency beacon with DSC designed for maritime rescue. With its slim design, small size, and minimal weight of 120 grams, the easy2 – AIS MOB is perfectly suited for use in an automatic life jacket. With a battery life of more than 24 hours at 0°C after activation and a radiated transmission power of 1 watt, the new easy2-MOB also boasts outstanding performance features that will once again make it stand out in the market. The rescue beacon significantly increases your chances of survival and can make the difference in saving a life at sea.
The easyONE DSC CL – AIS MOB is the previous model of the easy2. This device carries the same AIS/DSC functions, but is not equipped with the arming switch, or the ability to receive DSC messages in return, and is not Class M compliant.
Key Features
- The first Class M rescue transmitter approved on the market
- Automatic activation upon full water contact
- Can be used with many automatic life jackets without special preparation
- Full AIS MOB distress message (972…) to any AIS receiving system within transmission range
- Repeating AIS emergency message with updated GPS position data, course and speed
- DSC distress call to up to 8 different vessels in a closed loop procedure
- DSC distress call in the “open loop” procedure automatically after 10 minutes
- Programming is done via Bluetooth connection with free Weatherdock app
- 12+ hours battery life
- Powerful red LED torch for better visibility (e.g. in the dark)
- 1 watt radiated transmit power in AIS mode
- 0.5 watts radiated transmit power in DSC mode
- Transmission range of up to 7 nautical miles and more
- Fully buoyant without buoyancy aid
- Handy size
- No annual fees
- No licenses required
- No registration or login required
- According to all standards and regulations (ECDIS 63269 IEC 2022)
Technical data
- Approvals:
- CE
- FCC
- Dimensions (L/W/H):
- In operation: 420 x 50 x 30 mm
- When installed in vest: 195 x 50 x 30 mm
- Weight: 120 g
- Battery: 6V, 2 lithium cells, CR2
- Battery operating time
- AIS + DSC acknowledgement after first transmission:
- 60h+ (typical procedure, room temperature)
- AIS + DSC without acknowledgement:
- 40h+ (worst case, room temperature)
- Battery life:
- 7 years with a maximum of 30 test cycles (viewable in the app)
- frequency
- AIS: 161.975 and 162.025 MHz
- DSC: 156.525 MHz
- Controls:
- 2 buttons: “TEST” and ”ON”)
- Slider: Activation and deactivation of the automatic trigger function
- Displays: 9 LEDs (1 x “Program LED”, 2 x “Status LED” and 6 x “Emergency LED”)
- Operating temperature: -20°C to +55°C
- Storage temperature: -40°C to +70°C
