Description
The easyAtoN Type 3 features a robust, waterproof, and dust-resistant housing with IP67 protection rating. The device can be easily mounted on fixed or floating objects, such as collision avoidance buoys, by transmitting the marker’s identification and position. The device can create “synthetic,” “virtual,” and “real” electronic navigation markers that are displayed on an AIS-enabled electronic chart plotter or a PC with navigation software. The easyAtoN Type 3 is designed for typical use at harbor or port entrances, maritime warning signs or any type of fixed or floating navigation marker buoys. The easyAtoN Type 3 uses the AIS system to send up to 31 real, synthetic and/or virtual navigation mark positions to all nearby AIS receivers.
Key Features
- Ability to generate virtual and synthetic AtoN navigation marks
- Integrated GPS source
- AIS FATDMA or RATDMA (software selectable)
- Tamper-proof
- Waterproof and dustproof (IP67)
- Energy efficient
Technical data
- Transmitter: 1 transmitter (AIS1/AIS2)
- Receiver: 2 receivers (AIS1/AIS2), DSC (AIS Channel Management)
- Frequencies:
- Marine Band: 156.025 MHz – 162.025 MHz
- AIS1: 161.975 MHz
- AIS2: 162.025 MHz
- Transmitting power: 5 watts (50 ohms)
- Channel width/grid: 25 kHz
- Modulation: GMSK (AIS, TX and RX)
- Transmission rate: 9600 bit/s (AIS)
- Sensitivity: -114 dBm 25 kHz (<20% PER)
- Co-channel rejection: 10 dB
- Adjacent channel suppression: 70 dB
- Intermodulation: 65 dB
- Blocking: 84 dB
